Stainless steel is widely used for sheet metal, wall panels, and decorative pipes. They are created for the objects like closet rods, furniture frames and handrail. Stainless steel is hard and is usually used to coat the other soft metals. If you need to cut stainless steel sheets, it is vital to understand what cutting tool will be the best for the job. There are a lot of tools you can use to cut stainless steel and each one is perfect for cutting sheets.
 |
| Cut Stainless Steel Sheets |
Using a jigsaw
When you need to make delicate cuts like a curve, then a jigsaw will come very handy for achieving the task. When working with stainless steel sheets, friction is the main problem that you will encounter. Stainless steel gets heated very quickly and this heat travels to the blade as well. The transfer of heat to the tool will make it soft, blunt or dull. Therefore, if you wish to get a control over this, then you need to find a fine toothed carbide steel blade. This is a blade that does not get heated quickly. Now, with this blade in hand, all you need to do is to run the blade at a slow pace. The slower the pace of the tool, the lesser will be the chance of friction and heating. Never force the blade to work, always allow it to run at its own pace.
Using a circular saw
Circular saw is one of the best tools that you will come across for cutting stainless steel sheets. This hand tool helps you to accomplish your job perfectly. Circular saws usually have two types of blade for cutting. If you want a reasonable blade then the best option will be the cutting wheel blade or an abrasive blade. These blades are traditionally used for masonry and make limited cuts. But these blades do not make accurate cuts. If you want a blade to cut distinctively around the edges then it will be better for you to buy a special steel blade with thin teeth. They help you to do the job precisely and quickly. These special blades have a longer life than the cutting wheel blade.
Using a drill
If you want to use a drill to cut stainless steel sheets then it is sensible to understand that drill is used with bits and not blades. But, if you have hole saws then the case is extremely different. This is because the teeth of hole saws are similar to that of regular saw blades. The thick teeth have the capacity to cut softer material like wood and the fine teeth have the capacity to cut the heavy metals like stainless steel. When you are using the drill to cut stainless steel it is important to drill at slow speed to attain perfection in your work.
Using rotary tools
Rotary tools are hand machines that can cut a variety of materials. They use a cut-off wheel as an accessory. To cut the stainless steel sheets, you will have to use fiberglass reinforced cutting wheel for better results. By making use of this wheel, you will be able to control the tool easily because these hand machines are usually light in weight.
In the end, whenever you want to cut stainless steel sheets with perfection, it is imperative that you do it with proper tools. Always wear safety gear before using hand machines to avoid accidents. You must work slowly and peacefully if you want to cut the sheets perfectly and not make a mess out of your work. You can also take advice from the experts. if you are not sure of which blade and tool to use.
0 comments :
Post a Comment