Brick and Block Layer in Construction: Advantages and Disadvantages

Brick and Block layer construction is becoming more popular these days among different homeowners. But, are they popular because of their appearance and practicality. Find out the advantages and disadvantages of brick and block layer construction in detail here:

paint-a-house-exterior
Bricklayer

Advantages of Brick and Block Layer construction

  • Durable - Brick and block layer constructions are durable and can withstand extreme weather conditions and temperatures. They can last for a very long time with very little maintenance. This makes it one of the best reasons to choose to build with brick and block.
  • Construction on Site - In the case of brick and block construction, everything can be done entirely on the site as compared to timber constructions, where a lot of work is done off-site. So, with brick and block construction, one can avoid journeys of transporting construction materials from one place to another. Another benefit of construction on site is that one can easily rectify any problems that arise as all workers will be available at the same place.
  • Save Energy - Brick and blocks are the best materials when it comes to construction. They have the natural ability to reflect internal heat back into the home. This means you can save energy and money both.
  • Fire Resistant - Brick and block layer are considered to be the number one form of construction among homeowners as they are fire resistant. Another advantage of brick and block layer is that they can easily absorb sound, which in turn means less noise pollution.
paint-a-house-exterior
Commercial Bricklaying

Disadvantages of Brick and Block Layer Construction

  • Insulation Limit - Even though brick and block save energy, there is a limit to how much insulation can be installed between the cavity walls. Ideally, the cavity should not be more than 10cm to avoid structural issues.
  • Slow Construction - Brick and block layer construction has many advantages, but their biggest disadvantage is that it can take a long time for construction as compared to other building materials like timber. This is because brick and blocks are built by hand and they require more workers to work for long hours. This can lead to increase in the cost of the construction also. 
  • Risk of Cracks - If you are using brick and block for your cavity walls, there are high chances of a settlement of the cracks. The reason being the individual walls which are used for cavity walls are tall and thin and this can lead to settlement of the cracks. Hence, it is very important to be careful while using brick and block layers for your construction.
  • Not Suitable for Extreme Weather Conditions - Brick and block layer constructions cannot take place in severe weather conditions like heavy rains or low temperatures. This is because brick and block construction are wet and needs a lot of time to dry. So, if the temperature is freezing, construction could expand, and which means replacement. It is because of this disadvantage that most of the parts of the world where the climate is very cold and moist, timber constructions are preferred more than bricks and blocks.
  • Allows Dampness - Brick and block cavities can allow indoors for dampness. This is because if too much mortar falls on the cavity, it would allow damp to seep through the inner skin of the wall. It is very important to pay attention to the cleanliness of the cavity walls, as if not taken care it can lead to bigger problems.

If you are about to start with your construction, consider the pros and cons of brick and block layer construction and choose the best one that appears suitable for you.

 

Share on Google Plus

0 comments :

Post a Comment